PICOLLO OPENING & CLOSING INSTRUCTONS
Position A: Canopy Frame (1) is held in the closed position by
the Canopy Strap (2). The Tensioning Lever (3) is in
the locked position.
Position B: The Canopy Strap (2) is untied, and the Canopy
Frame (1) is released into a relaxed open position.
POSITION A
POSITION B
POSITION C
POSITION D
1
2
Position C: The Coiled Handle (4) with attached hook has been pulled
downwards and attached to the upper loop of the Harness (5)
part of the Tensioning Lever (3). The Stainless Steel Cable (6) is
properly positioned over the Cable Pulley (7), and inside of the
Cable Guide (8). (For opening and closing details, see page 6)
Position D: The Canopy Frame is in the full open position. The Tensioning
Lever (3) is engaged with the Locking Latch (9) and is in the
locked position.
(1) Canopy Frame
(2) Canopy Strap
(3) Tensioning Lever
(4) Coiled Handle with hook
(5) Harness
(6) Stainless Steel Cable
(7) Cable Pulley
(8) Cable Guide
(9) Locking Latch
3
8
5
PICOLLO POSITIONS
6
7
4
3
3
Exploded Illustration 1
4
5 / 9
9
THE PICOLLO LATCH & LEVER TENSIONING SYSTEM IS VERY EASY TO USE. PLEASE
FOLLOW THESE INSTRUCTIONS CAREFULLY TO LEARN HOW TO USE THIS SYSTEM TO
OPEN AND CLOSE THE PICOLLO CANTILEVER UMBRELLA. ENSURE ALL USERS
ARE PROPERLY TRAINED.
*NOTE: THE FOLLOWING INSTRUCTIONS SHOULD BE USED ONLY AFTER THE PICOLLO
UMBRELLA HAS BEEN ASSEMBLED USING THE INSTRUCTIONS ON PAGES 1-3.
C
Distributor:
Shadescapes Americas
TEL: 970.527.7070
www.shadescapesamericas.com
PROTRADE & WOODLINE cc. 2000