![WOODLAND SCENICS Possum Hollow TS151 Скачать руководство пользователя страница 2](http://html1.mh-extra.com/html/woodland-scenics/possum-hollow-ts151/possum-hollow-ts151_assembly-instructions_995042002.webp)
CABOOSE ASSEMBLY (Fig. 1)
1. Measure window openings. Transfer measurements to Clear Window Material, and then cut out. Install
Window Material with super glue. TIP! Apply Window Material to groups of windows. Cut Window Material
slightly oversized, as super glue can cause clouding.
2. Assemble and glue Parts 1–4 in numerical sequence. Keep edges flush and square.
3. Glue Parts 6 (2x) to Caboose Assembly (Parts 1-4). Top edges must be flush (Fig. 1a).
4. Assemble and glue Parts 7-9 to Caboose Assembly.
5. Using the Wood Ties (10x), assemble and glue to create a Caboose Support (Fig. 1b).
6. Using the Cardstock, cut a floor to fit ridge inside Caboose Assembly, and then glue in place (Fig. 1b).
7. Glue Caboose Support to bottom of Caboose Assembly.
8. Glue Parts 10-14 to Caboose Assembly.
NOTE: Part 14 fits underneath Caboose Assembly.
9. Glue Parts 5 (2x) to Part 7 (Fig.1c).
FINAL ASSEMBLY
After all assemblies have been completed, attach to layout in desired locations. The extra Castings included with this kit are details to enhance your scene and make it
unique. Add lights to your scene quickly and easily using the Woodland Scenics Just Plug™ Lighting System. Visit woodlandscenics.com to learn more.
16
15
16
Wire
CLOTHESLINE (Fig. 2)
1. Poke two holes in layout, approximately 2 1/2" apart. Insert
Clothesline Pole pin into hole and secure with Scenic Glue.
Make sure Clothesline Poles face each other.
2. Glue two equal lengths of Wire to crossbars.
3. Glue Parts 16 (3x) to Clothesline.
19
18
17
OUTHOUSE (Fig. 3)
1. Sand inner seams on Parts 17 and 18. Edges must
be smooth and square.
2. Assemble Parts 17 and 18.
3. Turn Outhouse Assembly (Parts 17 and 18) upside
down and sand top edge smooth.
4. Assemble and glue Part 19 to Outhouse Assembly.
Clear Window
Material
4
14
5
6
7
12
8
10
11
9
2
3
1
13
Caboose Support
Cardstock
FUEL STAND (Fig. 4)
1. Assemble and glue Parts 20-24 in
numerical sequence.
2. Assemble and glue Wire as illustrated.
21
Wire
24
22
20
23
ASSEMBLY INSTRUCTIONS
6
6
1
3
Fig. 1a
Fig. 1b
Fig. 1c
Cardstock
Wood Ties