Woodland Mills BANDSAW BLADE SHARPENER, Руководство оператора

Страница: 37 / 56

Sharpener Operator’s Manual
E. FINE-TUNE THE GRINDING HEAD MOVEMENT
The other half of the adjustment setting is fine-tuning the grinding head height so that
the bottom of the grinding disc touches the bottom of the tooth gullet.
Loosen the lower lock knob counter-clockwise so the depth adjustment rod can move freely.
This knob simply acts as a locking mechanism for the rod once the proper depth has been set.
Turn the upper knob to adjust the depth of the grinding head. Clockwise raises the head;
counter-clockwise lowers it. Tighten the lock knob once the depth has been set.
**Setting up a blade for sharpening requires a combination of both the advancement
adjustment and the grinding head movement steps. Read and understand both sections
before starting to fine-tune the sharpener.**
BBS-MY2020-EN: Rev A Page of 35 52 19-May-2020
Ensure weld seam
is still left of the
grinding disc
DISC/GULLET GAP
DISC/GULLET FLUSH
Loosen lower
lock knob
Turn upper knob
clockwise to raise
the head, counter-
clockwise to lower it