background image

1429 & 1430

EZ Lift

Owners Manual

U.S. Patent #6,742,558

Please read carefully!

Tools needed for assembly:

Phillips screwdriver

Tools needed for use:

9/16" socket & wrench

Содержание EZ Lift 1429

Страница 1: ...1429 1430 EZ Lift Owners Manual U S Patent 6 742 558 Please read carefully Tools needed for assembly Phillips screwdriver Tools needed for use 9 16 socket wrench ...

Страница 2: ... the Slides on the Vertical Supports This is done at the factory and needs no further adjustment See fig 2 Step 2 Attach the Router Block Handle 5860 5 to the Router Block Install the 3 8 spacer PS004 on the threaded rod of the Router Block Handle Insert a 1 1 8 barrel nut 5791B in the location shown on the Router Block approximately 7 16 in Make sure the slot in the barrel nut is in line with the...

Страница 3: ...l on the Vertical Supports See fig 5 Step 3 Insert the Lift Nut 1430F large threaded hole first into the rectangular opening in the Router Block See fig 6 Install a 1 4 lock washer WL001 and a 1 4 washer WB002 on to the 1 4 20 x 1 1 4 screw MT030 Install the screw through the hole in the Router Block where indicated and loosely tighten it in the Lift Nut See fig 5 7 Install the Adjuster Assembly 1...

Страница 4: ...ding approximately 1 4 out the bottom of the Dial Indicator The Dial Indicator should fit snugly on your socket but be able to be turned for zeroing out purposes on the socket by hand If the Dial Indicator is too tight sand one or several of the four protrusions slightly with 120 grit sandpaper wrapped around a dowel until a snug fit is achieved The hash marks on the edge of the Dial Indicator rep...

Отзывы: