Woodbridge V8300, Инструкция по эксплуатации

Страница: 16 / 19

14
The illustration of main unit keys
Power
1. Long press "power" button to enter standby mode; and then quick
press "power" button to restore functional mode.
2. When people sit, press "power" button to stop the function of
rear, front cleaning or drying. When no one sits, press "power"
button to switch between function mode and power save mode.
Flush
Press "flush" button to activate full flushing.
Dry
Press "dry" button, warm wind will come out. After a circle or
user leaves the seat, it will automatically stop.
Front
When the user sits on the seat, presses "front" button on main
unit, water will come out to activate front cleansing; if the user
presses "stop" button on remote control or "power" button on main
unit halfway, it will immediately stop front cleansing function; Front
cleansing will automatically stop after one cycle, if the user keeps
sitting , it will automatically start drying function and stops
automatically after one cycle of drying;
Rear
1.When the user sits on the seat, presses "rear" button on main unit,
water will come out to activate rear cleansing; if the user presses
"stop" button on remote control or "power" button on main unit
halfway, it will immediately stop rear cleansing function; Rear
cleaning will automatically stop after one cycle, if the user keeps
sitting , it will automatically start drying function and stops
automatically after one cycle of drying;
2.When no one sits on the seat, presses "rear" button, wand will
stretch out and can be cleaned manually.
Remark:
1. When main unit is in functional mode, the light of Power goes on; When
in energy save function, the light of Power goes off, and energy saver
lights on; When in standby mode, both lights are off.
2. The default setting of all function is on middle level, after using controller,
shift to the level setted last time.