TROUBLESHOOTING
Continued
or replace burner orifice
2.
Damaged
burner
2.
Replace damaged burner
3. Gas regulator
defective
3. Replace gas regulator
Slight smoke or odor during
1.
Residues from manufactur-
1.
Problem will stop after a
initial operation
ing processes
few hours of operation
3.
Gas regulator
defective
3. Replace gas control
gas line checked by local
natural or propane/LP
gas
company
or replace burner orifice
2.
Battery
is not installed.
2. Replace
batteries
in receiver
Heater produces
a whistling
noise when burner is lit
1
.
Air in gas line
1.
Operate burners until air is
removed from line. Have
Remote
does not function
1. Remote receiver "locked".
1.
See instructions supplied with
e
Remote Control
2. Air passageways on heater
2. Observe minimum installa-
blocked
lion clearances
(see page 10)
Burner backfiring
during
1. Burner orifice is clogged or
I.
Clean burner (see Cleaning
2.
Not enough air
2.
Check burner for dirt and
debris. If f
ound, clean
burner (see Cleaning and
combustion
damaged
a
nd Maintenance,
page
21
)
Maintenance,
page
21
)
burner orifice
and Maintenance,
page
21
)
24
3. Dirty or partially clogged
3. Clean burner (see Cleaning
4. Restricted gas flow through flex 4. Check and adjust flex connector
connector position to eliminate possible kinks.
Battery power is low.
and remote
control
, re-program
remote control.
OBSERVED PROBLEM
POSSIBLE CAUSE
REMEDY
