Woodbridge SBR4832R-1000 Скачать руководство пользователя страница 3

3

PREPARATION

Please read and understand this entire manual and the appropriate wall panel installation manual 

before attempting to install the product.

Estimated Installation Time:

 60 minutes 

Tools Required for Assembly (not included): Level, Shims, Drain Fitting, Silicone/ Plumber’s Putty, 

Wrench, 5 Gallon Empty Bucket, Thin Set  Mortar & Water, 1/4” - 1/2” Grooved Trowel.

The stud preparation is critical for the installation of the shower base.  It is essential the stud pocket 

be constructed square and plumb according to the roughing in information provided. 

1. Please inspect the shower base for breakage and report any damage to the store of purchase.  

  Allow the shower base to acclimate to room temperature before installing. 

2. Clean  and scrape the 

 of the shower base alcove. 

 

This space must be free of any debris in  

  order to get a proper adhesion with the thinset mortar.

3. Measure the size of the alcove to insure that the base and panels   properly.

4. Trial

   

the base in the alcove and make sure that the drain location lines up properly with the  

  shower base. 

 

Placing a level on the base, check that the base sits level on the 

 If needed,  

  use shims to level the base in the alcove. Note the shim locations before removing the base. 

  Lean the base back or remove from the alcove.

Use care when opening the box so you do not damage the shower base.

• DO NO

T proceed if any doubt arises about the correct or safe method of performing anything found  

in this manual. If necessary, hire or consult a trained professional for expert assistance before 

continuing.

CAUTION

WARNING

1.  

INSTALLING THE PAN 

 

  Install the drain 

 into the shower pan. 

  Follow the installation instructions that came with  

  the drain. Plumber’s putty or silicone are accept 

  able to use with the drain.

 

  Mix and apply thin-set mortar to the 

 using the  

  notched trowel.  Spread the mixture to achieve a  

  depth necessary to   the voids in the 

 and  

  enable the pan to sit level. A 50 lb. bag of thin-set  

  should provide at least 45-50 square feet of cover 

  age. All supporting points should have contact with  

  the thinset mortar.

 

1

www.woodbridgebath.com

SAFETY INFORMATION

Отзывы: