R
W
OODBRIDGE
R
W
OODBRIDGE
R
W
OODBRIDGE
R
W
OODBRIDGE
R
W
OODBRIDGE
R
W
OODBRIDGE
R
W
OODBRIDGE
R
W
OODBRIDGE
www.woodbridgebath.com
1
R
WOODBRIDGE
REMOTE CONTROL ILLUSTRATION
Installation Preparation
Remote control installation
Remote control holder installation 1
：
1. Drill two 6mm diameter holes in the wall at a distance of about 130.7mm, a depth of about 35mm
.
2. Remove the double-sided adhesive tape on the back of the holder.
3. Install an anchor in each of the holes, stick the holder to the wall and secure with screws and then
stick the patch with tape.
1. Clean and dry the pre-installation area of the holder.
2. Remove the double-sided adhesive tape on the back of the holder.
3. Stick the holder to the wall vertically and then stick the patch with tape.
1. Insert batteries into the remote control.
2. Put the remote control to the holder.
1. Please ensure the remote control is within reach when a person on the seat.
2. Do not install and use the product in damp places such as shower room.
3. Do not place the product in a place where it is easily exposed to water.
Remote control holder installation 2
：
Battery installation:
Notice:
Double-side tape
patch
patch
Double-side tape
Installation area
Battery cover