L100001
17
FINAL INSTALLATION
(continued)
Figure 42 - Placing log #5
5
.
Place
crossover
log (#
6
) as shown on
Figure 43.
Figure 43 - Placing log #6
Figure 44 - Placing log #
7
Light unit and after 15 minutes, check burner flame
If the flame is blue and only in the center, turn off unit and let cool. After unit cools, remove logs. If
any burner
holes are
not covered
, add more rock wool to the burner. Replace logs and check flame again. Save left over
rock wool
7
.
and glow. See
Burner Flame
,
Page 38.
to refresh when cleaning later. Too much rock wool can disturb the flame and cause sooting on the glass
.
4
.
Place
small
right side log (#
5
) over the log #
4
as shown on
Figure 42.
6
.
Carefully p
lace
upper
log (#
7
) as shown on
Figure 44.
3
3
