Woodbridge B0990S, Руководство пользователя, Страница: 3 / 12

R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
www.woodbridgebath.com
01
R
WOODBRIDGE
REMOTE CONTROL ILLUSTRATION
Installation Preparation
Remote control installation
Remote control bracket installation 1
：
1.Drill a 6 mm diameter hole in the wall to a depth of about 35 mm.
2.Tear off the double-sided adhesive tape on the back of the hanger.
3.Install the expansion pipe into the wall hole, and align it with the bracket hole. Attach the double-sided
adhesive tape on the back of the bracket to the wall,lock the screw, and tear off the double-sided
adhesive tape on the back of the patch and stick it on.
1.Clean and wipe dry the pre- installed area of the remote control bracket on the wall.
2.Tear off the double-sided adhesive tape on the back of the bracket.
3.Stick to the wall vertically, tear off the double-sided adhesive tape on the back of the patch and stick
it on.
1.Install the new battery into the remote control and replace the battery cover.
2.Put the remote control in the bracket.
1.When determining the installation position, it is necessary to ensure that the remote control
can be reached by hand when the person is sitting on the ring.
2.It is forbidden to install and use the product in the bathroom and other wet places. And do
not put it in the place where it is easy to be drenched by water.
Remote control bracket installation 2
：
Battery installation:
Notice:
Double-side tape
Double-side tape
patch
patch
Installation area
Battery cover