Gas-Fired Rice Cooker
Installation and Operation Manual
PG
8
OF
16
M0275.11 MAY 2020
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE
800.988.8103
TEL
360.650.1111
FAX
360.650.1166
woodstone-corp.com
UTILITY SPECIFICATIONS
GAS INFORMATION
The Wood Stone Gas Rice Cooker is equipped with a 3/4 inch FNPT gas connection located at the rear of the appliance� The
installer should provide an appropriate quick disconnect fitting for connection to the gas supply�
BURNER MANIFOLD PRESSURE
Model
Natural Gas (NG) model
Propane (LP) model
WS-GRC-60
3�7" W�C�
10�0" W�C�
BTU/HR INPUT RATE
Model
Natural Gas (NG) model
Propane (LP) model
WS-GRC-60
33,000 BTU/hr
33,000 BTU/hr
MINIMUM INCOMING GAS PRESSURE
Model
Natural Gas (NG) model
Propane (LP) model
WS-GRC-60
5�0" W�C�
11�0" W�C�
ELECTRICAL RATINGS
Model
Voltage
Amperage
WS-GRC-60
120 VAC
�5 A
The Rice Cooker is equipped with a NEMA 5-15P plug for use with a standard 120 VAC 15 A or 20 A outlet�
Electrical Grounding:
This appliance must be electrically grounded in accordance with local codes, or in the absence of
local codes, with the National Electrical code, ANSI/NFPA 70 or the Canadian Electrical Code, CSA C22�1 as applicable�
ELECTRICAL SUPPLY CORD AND GAS CONNECTION SHOULD BE ROUTED SO THAT THEY ARE NOT SUBJECTED TO
THE HEAT COMING FROM THE RICE COOKER.
The Rice Cooker is equipped with a gas pressure regulator that is preset at the factory� This regulator is installed in the
front compartment� If incoming gas pressure is less than 1/2 psi (14 inches W�C�), no additional regulator is required or
recommended� If incoming gas pressure is greater than 1/2 psi (14 inches W�C�), an external regulator, by supplied others,
must be installed on the gas line serving the appliance�
If you must convert the Rice Cooker to run on a different gas type, i�e� NG to LP, please contact Wood Stone to obtain the
necessary parts and instructions�
