G
6
Installation and Operation Manual
An ongoing program of product improvement may require us to change
specifications without notice.
WS-LCHUG-900 Churrasco,
Revised June 2015. Doc no: M0100.02
or visit
woodstone-corp.com
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
Toll Free 800.988.8103
Tel 360.650.1111
Fax 360.650.1166
Side view
Plan view
Front view
UTILITIES SPECIFICATIONS
Gas:
3/4" NPT gas inlet
98,000 BTU/hr Natural Gas (NG)
OR
87,000 BTU/hr Propane (LP)
Maximum gas inlet pressure
1/2 psi (14 inches W�C�)
Venting
The Churrasco must be vented with a Listed Type 1 exhaust
hood, or one constructed in accordance with NFPA 96 and
all relevant local and national codes� This appliance must be
vented in accordance with all relevant local and national codes,
and in a manner acceptable to the authority having jurisdiction�
Electrical
120 VAC, 0�33 A, 1Ph, 60 Hz
NEMA5-15 plug on 10' cord
Gas utility connection made on
bottom of the unit�
Refer to data plate when installing�
Unit Weight: 480 lbs
Shipping Weight: 755 lbs.
REV:
DATE:
PART #:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
WS-LCHUG-900
Churrasco 900
General Arrangement
5/16/2014
bena
0
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
DWN BY:
SHEET:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS PROHIBITED
An ongoing program of product improvement may require us to
change specifications without notice.
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\CSI-Custom_Stainless_Industries\Churasco\LCHUG-900\LCHUG-900 (WOODSTONE).dft
1 of 1
7 1/4"
190mm TYP
7"
180mm
32 3/4"
830mm
27 3/4"
710mm
31 1/2"
800mm
49 1/4"
1250mm
35 1/2"
900mm
37 3/4"
960mm
6 1/4"
160mm
23 1/2"
600mm
REV:
DATE:
PART #:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
WS-LCHUG-900
Churrasco 900
General Arrangement
5/16/2014
bena
0
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
DWN BY:
SHEET:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS PROHIBITED
An ongoing program of product improvement may require us to
change specifications without notice.
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\CSI-Custom_Stainless_Industries\Churasco\LCHUG-900\LCHUG-900 (WOODSTONE).dft
1 of 1
7 1/4"
190mm TYP
7"
180mm
32 3/4"
830mm
27 3/4"
710mm
31 1/2"
800mm
49 1/4"
1250mm
35 1/2"
900mm
37 3/4"
960mm
6 1/4"
160mm
23 1/2"
600mm
REV:
DATE:
PART #:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
WS-LCHUG-900
Churrasco 900
General Arrangement
5/16/2014
bena
0
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
DWN BY:
SHEET:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS PROHIBITED
An ongoing program of product improvement may require us to
change specifications without notice.
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\CSI-Custom_Stainless_Industries\Churasco\LCHUG-900\LCHUG-900 (WOODSTONE).dft
1 of 1
7 1/4"
190mm TYP
7"
180mm
32 3/4"
830mm
27 3/4"
710mm
31 1/2"
800mm
49 1/4"
1250mm
35 1/2"
900mm
37 3/4"
960mm
6 1/4"
160mm
23 1/2"
600mm
G