Wood-mizer SlabMizer MB200, Руководство по эксплуатации

Страница: 24 / 55

Planer Assembly
Assemble the Bed Sections
Planer Assembly WMdoc082019 3-3
3
3.2 Assemble the Bed Sections
NOTE: Disassemble any shipping straps from the bed sections before
beginning.
1. Lay the bed sections end-to-end so the side rail bolt holes are at the top off each section.
2. Slide the sections together and secure with four M12-110mm hex head bolts and M12
nylon lock nuts.
NOTE: Make sure the top surfaces of the outer side of the bed sections are
aligned. It may be necessary to pry one bed section up or down until the surfaces are aligned, then tighten the
bolts.
FIGURE 3-2
M12-110mm Bolt (4)
M12 nylon Lock Nut
(4)
Align Top of Bed Sec-
tions before tightening.
FIGURE 3-3