Remote Operation
Hydraulic Control Operation
Remote Operation
ROdoc101921
1-7
1
1.5
Hydraulic Control Operation
The hydraulic control levers become operational when the contacts at the bottom of the
carriage touch the power strip on the frame tube. The hydraulic control levers will only
work when the cutting head is close enough to the front end of the mill to touch the power
strip.
See Figure 1-5.
Hydraulic units have ten control levers to load, clamp, turn and level logs.
Use the hydraulic control levers to get the mill ready to load a log.
DANGER!
Keep all persons out of the path of moving
equipment and logs when operating sawmill or loading and
turning logs. Failure to do so will result in serious injury.
FIG. 1-5 OPERATOR CONTROL BOX
Clamp
In/Out
Main
Clamp
Up/Down
Main
Front Toe
Board
Up/Down
Loader
Log Turner
Clamp
Up/Down
Front
Clamp
In/Out
Front
Clamp
Up/Down
Rear
Clamp
In/Out
Rear
Rear Toe
Board
Up/Down