Wood-mizer LT20 B1-4 E15 SMH, Руководство пользователя

Страница: 28 / 142

Safety & General Information
Engine/Motor Specifications
1
1-17 25doc063022 Safety & General Information
See Table 1-4. The performance capacity of the LT20 series sawmill is listed below.
Peak cutting rates are measured in 12” (30 cm) wide red oak and represent the capability
of the sawmill only. Rates based on using Tru-Sharp 1 1/4” x .042 blades.
1.9 Engine/Motor Specifications
See Table 1-5. The power options available for the LT20 Series sawmill are listed below.
See Table 1-6. See the table below for power supply specifications for the LT20 sawmill.
DANGER! It is recommended that a 30mA Ground Fault
Interrupter (GFI) be used.
1
Maximum log capacity for a basic mill is 2000 Kg.
Model Linear Blade Speed Maximum Cutting Speed
LT20B3E15SMH --- 5.2 m/min.
TABLE 1-4
Engine/Motor Type Manufacturer Model No. Power Other Specifications
11HP Electric Tamel SA,
Poland
Sg 132S-2B HM 7.5 kW 14.5 A, 2925 r.p.m.
15HP Electric Tamel SA,
Poland
Sg 132S-2PC HM 11 kW 22.3 A 2920 r.p.m.
22HP Diesel Kubota D1005 22 HP 3600 r.p.m.
25HP Gasoline Kohler CH25 25HP
3600 RPM, 725 cm
3
TABLE 1-5
3-Phase
Volts
Fused
Disconnect
Switch
Recommended
Wire Size
400 VAC 25 Amp
4 mm
2
up to 15 m of length
TABLE 1-6