Wood-mizer EG800EH40S, Руководство пользователя

Страница: 27 / 59

Edger Setup
Obsługa maszyny EGdoc031120 3-6
3
4. Feed Roller Speed Adjustment
The feed roller speed switch controls the speed at which the feed roller moves. Turn the switch right
to increase the speed, turn left to reduce the speed.
5. Emergency Stop
Push the emergency stop button to stop the blade and the track feed motors. Turn the emergency
stop clockwise to release the stop. The machine will not restart until the emergency stop is released.
3.4 Edger Setup
IMPORTANT! Before starting to use the Edger you have to meet the
following conditions:

Set up the Edger on firm, level ground.

Under roof, the Edger should always be operated with the sawdust collection system.

The edger must not be operated outdoors when it is raining/snowing and in case of rain/snow
the edger must be stored under a roof or indoors.

The sawmill can be operated in temperature range from -15
o
C to 40
o
C only.

Illuminance at operator's position must be 300lx.
1

The Edger’s operator positions (two operators) is shown below.

Have a qualified electrician install the power supply (according to EN 60204 Standard). The
power supply must meet the specifications given in the table below.
1 The light source can not cause stroboscopic effect. (PN-EN 12464-1:2012)
FIG. 3-4
3-Phase Volts Fuse Disconnect
bezpiecznikowy
Recommended Wire Size
TABELA 3-1
!