Wood-mizer DSBA-40, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 30 / 47

Maintenance and repairs
Lubrication instructions
6
6-2 15doc030910 Maintenance and repairs
6.2 Lubrication instructions
1. During use of the moulder one should check the condition of the bearings in the motors every
2800 working hours and in case some irregularities have been found (for instance, noisy
action, excessive plays, excessive temperature increase) one should replace them.
2. Scaled bearings are not to be lubricated by the user since they have been filled with grease
at the factory.
3. Other elements are to be lubricated as indicated in the table below.
Lubricati
on point
Lubricated element Grease Lubricati
on
method Tone period Remarks
1
Horizontal guide Machine oil
L-AN 110 Oiler Some
drops
every day
2
Vertical guide Machine oil
L-AN 110 Oiler Some
drops
every day
3
Left screw Machine oil
L-AN 110 Oiler Some
drops
every day
4
Right screw Machine oil
L-AN 110 Oiler Some
drops
every day
5
Vertical screw Machine oil
L-AN 110 Oiler Some
drops
every day
6
Rear pressure element Machine oil
L-AN 110 Oiler Some
drops
every day
7
Front pressure element Machine oil
L-AN 110 Oiler Some
drops
every day
8
Sliding bearing of feed rollers Grease
£ -AN10
Forced
greaser Every day
9 Sliding guidelines of
thicknesser table Machine oil
L-AN10
oiler When
needed