Maintenance
Fuel Filter
3
Maintenance
WM doc 2/18/22
3-2
Replace the pre-cleaner (element wrapper) every 2000 hours of operation.
See the engine manual for further instructions.
3.4 Fuel Filter
Replace the fuel filter every 100 hours of operation or as required for engine performance.
3.5 RPM Adjustments
WARNING!
Remove the blade before performing any engine service. Failure
to do so may result in serious injury.
Check the RPM with a tachometer every 200 hours of operation.
Before checking the RPM, make sure belt and brake strap tensions are correct (See Sawmill Maintenance).
Check oil, fuel, and coolant levels.
Ensure the throttle cable does not affect the engine RPM when the clutch handle is disengaged. Ensure the cable is not bent or
kinked.
Engine
High End RPM
Low End RPM
D10
3600
1000
