Safety & General Information
Noise Level
1
1-5
BMS500/600doc121319
Safety & General Information
1.6
Noise Level
See Table 1-2.
The level of noise generated by the BMS500/BMS600 sharpener is given in the
table below
1
.
1.7
Motor Specifications
See Table 1-3.
The grinder motor specifications are listed below.
See Table 1-4.
See the table below for the supply voltage specifications.
Max. Noise Level
BMS500
/
BMS600
80 dB (A)
TABLE 1-2
1. The measured values refer to emission levels, not necessarily to noise levels in the workplace. Although
there is a relation between emission levels and exposure levels, it is not possible to determine with certainty
if preventives are needed or are not needed. The factors affecting a current level of noise exposure during
work are inter alia room characteristics and characteristics of other noise sources, e.g. number of machines
and machining operations nearby. Also, the permissible exposure level value may vary depending on country.
This information enables the machine’s user to better identify hazards and a risk.
Type
Manufacturer
Model
Power
Other Data
Electric Motor
Besel, Poland
Sh7IX-2C
.75 kW
2820 r.p.m.
TABLE 1-3
Sharpener
Type
Voltage
Current/Frequency
BMS500AU
BMS600AU
1 x 230V [ L1+N (L1=230V, N-neutral)]
1 x 230V [L1+L2 (230V phase-to-phase voltage)]
18A @ 50/60Hz
22A @ 50/60Hz
BMS500B(S/U)
BMS600B(S/U)
3 x 230V
12A @ 50/60Hz
16A @ 50/60Hz
BMS500C(S/U)
BMS600C(S/U)
3 x 460V
5,5A @ 50/60Hz
8,5A @ 50/60Hz
BMS500H(S/U)
BMS600H(S/U)
3 x 400V
10,5A @ 50/60Hz
11,5A @ 50/60Hz
TABLE 1-4
