GETTING STARTED
Recharging the battery
1.
Plug the smaller end of the Charging
Cable into the right side of the
CameraMator device.
2.
Attach the USB end of the Charging
Cable into the USB port of your laptop or
any USB charger.
The device should now begin charging
(indicated by the amber LED on the top right-
hand side).
Power Switch
Turn on the device using the power switch on
the right side of the device. The CameraMator
logo will appear on the LCD screen, and after a
few seconds the device will be ready to use.
Connecting the device
1.
Plug the larger end of the USB cable into
the port on the left side of the device.
2.
Attach the smaller end of the USB cable
to the USB port of your camera.
3.
Turn the camera on and the device will
identify the camera.
4.
Make sure your camera is in JPEG or
RAW+JPEG mode
Standalone Wi-Fi Setup
1.
Go to the Settings app on your iPad or
iPhone.
2.
Under Wi-Fi, select the "CameraMator"
