June
10,
2011©2011
WOO
AUDIO
tm
Inc.
All
rights
reserved.
www.wooaudio.com
Rev
1.0.
June
10,
2011.
10
Turning the amplifier on:
1.
Turn the volume knob to the lowest position.
2.
Insert a headphone into headphone output
①
.
3.
Press the power switch
③
to a locking position. The power LED will light.
4.
Observe that all tubes light gradually.
5.
Let the tubes warm up for at least 1 minute before turning up the volume.
Front panel diagram:
①
Headphone output
②
Volume control
③
Power switch
④
Power
LED indicator
Break-in period:
It is recommended to allow the amplifier to operate 150+ hours so that peak performance can be
realized. An effective way to break-in the amp is to run the amp normally with music playing.
Please do not leave the amp running continuously.