06
MEGA-PIXEL RUGGED PTZ
07
MEGA-PIXEL RUGGED PTZ
4. SETTING & INSTALLATION
4. 1 Unpacking
Manual
MAIN CABLE
Detaching Hook
4PIN Communication Terminal
Guiding sticker for installation
Switched-Mode Power Supply
Before starting up the camera, set the protocol, camera address and details with dip-switches referring
to the following.
Each camera must have a unique address(ID). Identical ID’s on the same line may damage the control
circuit caused by an electric short.
4. 2 DIP Switch Setting
Open the back side of the
cover and set the camera
Camera ID (ADDRESS)
Ex) S/W 303=0, S/W 304=0, S/W 305=1
Address=001
S/W305 : 1 digit of ID
S/W304 : 10 digit of ID
S/W303 : 100 digit of ID
S/W303
S/W304
S/W305
LD1
SW301
SW302
SW303
SW304
SW305
CN3
POWER CABLE
Accessories
L-wrench,alarm cable
M8 wrench-bolt,M8 nut