PRODUCT INTRODUCTION
PRODUCT INTRODUCTION
1.2 Part name & Functions
1.2.2 Top side
①
Power LED : It shown the power is on.
②
Red LED : Red light is turned on when charging it.
Green LED : Green LED is on when the battery is fully charghed.
③
PWR button : Power ON/OFF button.
④
SET button : Used to confirm selection in menu screens and set the picture ratio.
⑤
<, > button : Move and select menu.
⑥
MENU button : OSD menu ON/ OFF to set monitor setting.
⑦
MODE button : To change monitor mode and recording mode.(Rapport-10HD PRO)
⑧
REC button : Recording, stop, replay button in the monitor mode.(Rapport-10HD PRO)
1.2.3 Back & side
①
⑥
⑦
⑧
⑨
⑤
②
④
③
①
Brace : It braces the product.
②
Power switch : ON/OFF the main power supply.
③
Phone jack : Receive Audio by earphones.
④
DC Power Jack : DC power input jack
⑤
USB : Connect USB with PC for update firmware.
(Send the recorded video file of Rapport-10HD PRO to the PC)
⑥
HD-SDI : Input HD-SDI.
⑦
CVBS : Input CVBS .
⑧
HDMI : Input HDMI.
⑨
VGA : Input VGA .
①
LCD : Display the video on the screen.
②
Infrared singal receiver : Receive infrared signal.
**Be careful not to be covered when use it.
1.2.1 Front
① ② ③ ④ ⑤ ⑥
⑦ ⑧
①
②
08
Multi-Format Input Monitor
09
Multi-Format Input Monitor
