Wonwoo MMK-H208, Инструкция по установке и эксплуатации

Страница: 7 / 46

3. Installtion
- The following steps of installation and connection work should be done by qualified service personnel or system installers
and should conform to all local codes.
- Be sure to switch the camera off before installation is completed.
- Do not install the camera near the air outlet of an air conditioner.
- Before installation, set the dome system with Dip switch on the back side of the mechanism part, and assemble the mechanism
and housing according to the below instruction
3. 1 Installtion
Attach the provided wall bracket rubber to a wall bracket
as shown in the below picture.
After connecting the cable, set the mount
in the proper position and fix the 2 screws
(M4*8)
CEILING PIPE
Install calbes into the bracket first.
WALL BRACKET
WALL BRACKET
WALL BRACKET RUBBER
INSERT
MOUNT ADAPTOR
PIPE SOCKET
CEILING PIPE
After connecting the cable, set the mount in the proper position
and fix the 2 screws (M4*8)
Install the bracket to the wall using anchor bolt.
When install the ceiling bracket, screw the ceiling pipe
to the pipe socket as figure.
Install the bracket to
the ceiling using
anchor bolt.
FRONT
FRONT
<Wall Mount Type>
<Ceiling Mount Type>
1 2
1
2 3
3 4
07