14
EWSJ Series Outdoor Speed PTZ Dome Camera System User
’s Guide
15
EWSJ Series Outdoor Speed PTZ Dome Camera System User
’s Guide
4. 1 Powering On
When turning EWSJ series camera power on, there is a ten (10) second pause before the camera starts
its homing phase. During the homing phase the camera pans left and right and tilts up and down. It also
adjusts the lens focus.
4. 2 Establishing Camera Control
The most common way to interface with the camera is using a keyboard and on-screen display (OSD)
menu. This method is the most common and is covered in this manual.
4. 2. 1 Basic Keyboard Operation
The following tables summarize the basic operations for a standard keyboard and the functions available
to control EWSJ series.
Table 1. 1 Typical Keyboard Functions
Table 2. 1 Typical Keyboard Controls for EWSJ series speed PTZ dome camera system
4. ON-SCREEN DISPLAY PROGRAM MENU
Typical Keyboard Features
Usage
Function Keys
Number Keys
Camera Key
Enter Key
Focus Key (Or Near Key)
Iris Key
Key LEDs
LCD
Joystick
Selects a specific control setting
Inputs a number from 0 to 9.
Selects a camera number
Inputs a selection
Sets the lens focus or make a menu selection in OSD menu.
Sets the lens iris setting or makes a menu selection in OSD mode.
Indicates an active key
Displays the current status
Controls a pan/tilt/zoom (PTZ) EWSJ series
Dome Operation
How to Control
To Pan Side to Side
To Tilt Up and Down
To Zoom In
To Zoom Out
Move the joystick left or right.
Move the joystick forward and back.
Twist the joystick clockwise.
Twist the joystick counterclockwise.
EWSJ series is programmed through the on-screen display (OSD) menus.
To access the OSD menus, you must open the main Setup Menu.
4. 2. 3 Setup Program OSD Menu From Keyborad.
The main Setup Menu provides access to all programmable EWSJ series settings.
4. 2. 2 Keyboard Commands
- Keyboard control commands are composed of a sequence of two (2) inputs with the following
convention: 1) a Command number key(s) + 2) a Function key.
- Command numbers range from 1 to 999.
- Refer to the keyboard manual for the key naming conventions in detail.
4. 2. 4 Go into the camera setup 0SD Menu
Press key “1” and keep pressing the “MENU” key for approximately 3 seconds, or press key “95” and
press “Preset” key to go into the set-up menu. Setup menus are shown in the diagram below. You can
adapt the camera to your requirements by setting up the respective items in these menus.
4. 2. 5 OSD Menu tree
MAIN MENU
MOTION
DOME
CAMERA
CLEAR
PTZ RESET
EXIT
< NEAR / RIGHT ▷ MOTION >
→
→
→
→
MOTION MENU
PRESET
TOUR
SCAN
PATTEN
AREA
PRIVACY
BACK EXIT
▷
< NEAR / RIGHT ▷ PRESET >
▷
▷
▷
▷
▷
▷
DOME MENU
TITLE :
POWER UP ACTION
PARK ACTION
DISPLAY ON / OFF
SPEED BY ZOOM
AUTO FLIP
FACTORY SET
SAVE BACK EXIT
▷
< NEAR / RIGHT ▷ TITLE >
: ON
▷
▷
: ON
: ON
CAMERA MENU
FOCUS
D-ZOOM
WHITE BAL
BACKLIGHT
EXPOSURE
DAY / NIGHT
IRIS SET
DIS MODE
NEXT SAVE BACK EXIT
▷
< NEAR / RIGHT ▷ FOCUS >
: AUTO
: ON
▷
: OFF
▷
: COLOR
CLEAR MENU
PRESET
TOUR
SCAN
PATTEN
AREA
ALARM
PRIVACY
BACK EXIT
▷
< NEAR / RIGHT ▷ PRESET >
▷
▷
▷
▷
▷
▷
