OWNER’S GUIDE
Page 8
Figure 5 Loose Coal Identification
Figure 4 Front Base Coal Position
Figure 3 Rear Base Coal Position
Figure 2 Ceramic Rear Wall
Position
REFITTING COALS
1.
Fit the ceramic rear wall into the bracket at the
back of the firebox. See figure 2.
2.
Place the rear base coal in the firebox. It should
rest on the ledges at the sides and back of the firebox
and its rear face should touch the rear ceramic wall.
See figure 3.
3.
Place the front
base coal in the
firebox with its
bottom front locating
over the front rim of
the firebox. Pull the
coal forward so that
it locates
immediately behind
the front rim of the
firebox. See figure 4.
4.
There are two types of loose coals.
Type “A” coals have a prominent lip. There are
three coals of this type.
Type “B” are squarer
than type “A” and have
two grooves on their
top surface.
The coals are shown in
figure 5. Identify these
coals before attempting
to fit them.
All manuals and user guides at all-guides.com
