5
Figure 4
Figure 5
CLEANING
Note: Before attempting any of the following ensure that the fire has been allowed to
cool completely.
Note: Some discoloration of the coals is normal.
The cast parts of the fire should be carefully cleaned with a lint free damp cloth. On
no account should any metal polish or similar be used as this may prove harmful to
the surface.
The coals should normally require no maintenance between the annual inspection
described in the installation and maintenance instructions. However, if your fire is
used frequently the coals may need cleaning. The coals should be removed and any
sooting carefully removed from the surface with a soft brush.
The burner surface can be carefully vacuumed to remove any loose particles. Note:
Surface cracking is normal and no cause for concern.
To reassemble, take the following steps.
PLACING THE COALS
Placing the front coals
Position both front coal pieces as
shown in figure 4.
Placing the fuel matrix
Position on top of the burner as
shown in figure 5. The rear face of
the burner should locate into two
cut-outs on the top face of the rear
legs. Ensure that the matrix sits
flatly on the top of the burner.
