105
Set Up WRED Group with Drop Probability Threshold
The equivalent ICLI commands are:
# configure terminal
!Set Minimum threshold as 10 and Maximum Threshold as 50 on Queue 4. (config)# qos wred group 1 queue
4 dpl 1 min-fl 10 max 50
Note:
Please note that ports are in WRED Group 1 by default. This is why further configuration is not necessary.
Example
: Configure WRED on Group 2, Queue 5, DPL 1 with a Minimum Threshold of 10% and
Maximum Threshold of 90%. Maximum Threshold unit is Fill Level. Assign Ports 1 and 2 to WRED Group 2.
Configuring WRED with Fill Level Threshold Using WebGUI
To configure WRED on Group 2, Queue 5, DPL 1 with a Minimum Threshold of 10% and Maximum Threshold of
90% (maximum Threshold unit is Fill Level), perform the following steps.
1.
Click
configuration
>
QoS
>
WRED
, and configure WRED as shown in the following illustration.
Set Up WRED Group with Fill Level Threshold
2.
Click
Configuration
>
QoS
>
Port
, and configure Ports 1 and 2 to use WRED Group 2 as shown in the
following illustration.
Associate WRED Group with Port
