~
151
~
H
OW TO REACTIVATE THE PROGRAMME FUNCTION
« A
UTO
-
OPENING
»
❖
If you want the appliance door to open
again
automatically
at the end of the
programme, you must reactivate this programme function.
1.
Press and hold the «
F
UNCTION
» -
BUTTON
(«
»)
and the «
P
ROGRAMME
»
-
BUTTON
(«
»)
for 3 seconds simultaneously.
2.
The corresponding operational status indicator of this function («
»)
goes on
.
3.
The programme function «
A
UTO
-
OPENING
»
is reactivated and the door of the
appliance
opens automatically
at the end of a cleaning programme.
If the selected cleaning programme cannot be combined with the desired
programme function(s), these functions cannot be selected or will be cancelled
and the indicators switches off automatically.
P
ROGRAMME FUNCTION
:
« D
ELAYED PROGRAMME START
»
❖
You can set a delayed programme start.
❖
Set the cleaning programme and the desired additional programme function(s)
first and then activate this function using the «
D
ELAY
» -
BUTTON
:
«
».
You can set a delay period from 1 hour to 24 hours.
The programme function «
D
ELAYED
PROGRAMME
START
» may not be
available for all cleaning programmes (see also chapter 6.1 T
HE ADDITIONAL
PROGRAMME FUNCTIONS
).
H
OW TO ACTIVATE THE PROGRAMME FUNCTION
« D
ELAYED
PROGRAMME
START
»
1.
Switch on the appliance using the « O
N
/ O
FF
» -
BUTTON
.
2.
The appliance is now in
STANDBY MODE
.
3.
Set the desired cleaning programme using the « P
ROGRAMME
» -
BUTTON
. Use
the corresponding buttons to set the desired additional programme functions.
4.
Press the «
D
ELAY
» -
BUTTON
(«
»)
repeatedly
until the desired delay
period (in hours) is indicated on the display.
Each press of the «
D
ELAY
» -
BUTTON
increases
the delay period by one hour.