86
T
HE LIGHT IS NOT WORKING
.
1.
The LED light may be damaged.
1.
Refer to replace LED lights in
cleaning and care chapter.
2.
The control system has disabled the
lights due to the door being kept
open too long.
2.
Close and reopen the door to
reactivate the lights.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
T
HE OPERATING CONDITIONS DESCRIBED BELOW ARE NORMAL
AND DO NOT INDICATE A MALFUNCTION
.
❖
The refrigerant generates a sound similar to flowing water.
❖
Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
❖
The sides of the appliance may get warm while the appliance is running.
Distinct noise
When you operate the appliance for the first time or the temperature falls below
a certain level, the appliance will operate with high power to reach the preset
temperature.
Condensed water in / on the appliance
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
Clicking
You will hear the compressor click if it is activated or deactivated.
Hum
is caused by the compressor while running.
Knocking / snapping
may be generated by sequential expansion and shrinkage of the components of
the cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.
