13
Note:
If you don’t want to save the configurations, click “Cancel”.
d)
Repeat steps from a) to c), configure other commands.
Note:
The “Remove” buttons in last column allow you to remove the corresponding commands
configured for the button.
e)
Click “Save” to save all the configured commands to KEY1 button.
Network Settings
“Network Settings” is available to configure keypad network information. Click “Network Settings” submenu to
enter the configuration page.
•
DHCP:
When keypad DHCP mode is enabled, the keypad should connect to network with DHCP server. The IP
address, Netmask, and gateway parameters will be automatically assigned by DHCP server.
•
Static:
When keypad is set to Static IP mode, the IP address, netmask, and gateway parameters can be assigned
manually.
•
Save:
Save the configuration changes.
Note:
The keypad default network setting is Static, and the default IP address is 192.168.1.254.
System Settings
“System Settings” is available to configure system functions. Click “System Settings” submenu to enter the
configuration page like below.
