11
Key Settings
After “
” is configured successfully, click “Key Settings” to configure commands for each keypad
button. For each button, it can configure 6 commands at most.
(1)
Click the bottom right corner of the button (red box of Fig 1, take KEY1 as an example) to enter the following
page (Fig 2).
Fig 1
Fig 2
(2)
Configure the items in the picture above.
•
Key alias edit
: Configure a name for the button. then click “Save” to take effect.
Note:
The length of each button’s name shall not exceed 24 characters and can include letters, numbers
and underscores.
•
Command
: Click “Edit” in the web table to choose devices that are needed to program.
