4K IP Streaming Extender
12
5. GUI Control
5.1 Basic Configuration
The web-based GUI is used to configure and control signal extension, routing and
switching between TX and RX units.
Before proceeding GUI, make sure all IPA units are powered ON. Then ensure that the
IP addresses of PC and all IPA units are on the same local area network (LAN). If this is
not the case, please manually set IP address mode as DHCP.
Please type
the IP Address of the control PC
in the internet browser, and it will enter
the below log-in webpage:
Username:
admin
Password:
admin
Please type the user name and password, and then click
Sign In
.
Upon launch, the main interface appear as per the picture below:
