2
I. Installing the E-Base.
A Kiowa Heat Shield (HS402) is a MUST. As Wolfman Does not Warranty Heat Melt.
There are three methods of mounting the E-Base on your bike, depending on how your bike is set up.
A.
Tension-O-Matic rear Strap
. **No Rack or space above tail light on bike. **
1-Place E-Base across the seat and rear fender of your bike.
FIG2
2-Place the Tension-O-Matic strap on the rear fender, spread the Gutter Hooks of the Tension-O-Matic across
the rear fender so the Gutter Hooks catch the bottom lip on each side of the rear fender. FIG2
FIG3
FIG4
3-Pull the Tension-O-Matic strap away from the rear fender to tension straps. FIG3
4-Thread Tension-O-Matic straps through rear buckles and Tighten straps to set seat position-
**Tip: for more seat space, position E-Base further back on seat and fender. FIG4
