Wolfen 1806668, Руководство по установке

Страница: 5 / 10

5
TM
Set-Up
1. Rough in positions of water inlet, waste outlet and fixing bracket holes. Ensure inlet connection
extends 40mm from finished wall. Prepare waste outlet according to required set out (185mm min -
285mm max) and drill floor fixing brackets into position (60mm inside traced mark of pan rim).
2. Insert top-fix plastic fixing nut (2) and bolt (2) into pan (supplied) to fit the cistern.
S-Trap Installation
1. Lubricate the rubber fins of the pan bend and position in the waste pipe at the required height. Fix
the pan connector back to the wall using the rod and bracket.
2. Align and push pan back to wall, connect pan spigot into waste bend ensuring firm connection.
3. Fix cistern onto pan, bucket flush and check for leaks.
Water Inlet & Levelling Pan
1. Connect rear water inlet valve using 15mm mini cistern stop supplied. Fit hose elbow to mini
cistern stop Fill the cistern and ensure correct water level. For adjustment refer separate inlet valve
instructions,
2. Ensure that pan is level and that cistern aligns with wall. Make minor adjustments if necessary.
3. Fix pan to floor using screws and caps provided
4. Silicone pan to floor. Remove excess sealant.
Important Note
Ensure that the back inlet connection extends 40mm from the finished wall.
Back Inlet
Connection
Finished
Wall
40mm
CLEANING
We recommend the use of soap water or approved cleaners. This product should not be cleaned
with abrasive materials. Damage caused by any improper treatment is not covered by the product
warranty. Refer to Warranty Conditions.