Planning Information
Model W482210 (R) Pro Wall Hood
6
Dimensions in parentheses are in
millimeters unless otherwise specified.
Ducting considerations for
Pro low-profile wall
hoods.
DUCTWORK INSTALLATION
THROUGH ROOF
22"
(559)
DEPTH OF HOOD
8" ROUND DUCT
SOFIT OR CABINET
OR DUCT COVER
REMOTE BLOWER
*HORIZONTAL DISCHARGE APPLICABLE ON LOW-PROFILE WALL HOODS
(EXCLUDING W302210I AND W362210I) USING A REMOTE BLOWER. LOW-PROFILE
WALL HOODS WITH AN INTERNAL BLOWER MUST USE VERTICAL DISCHARGE.
DUCTWORK INSTALLATION
THROUGH WALL
DISCHARGE COLLAR
HORIZONTAL
DISCHARGE*
VERTICAL DISCHARGE
TRANSITION
17
3
/
4
"W x 4
1
/
4
"D TO 8" ROUND
9
3
/
8
"H (INCLUDING FLANGES)
30"
TO
36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
36"
(914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
10"
(254)
HEIGHT OF HOOD
WALL HOOD
ROOF CAP OR REMOTE BLOWER –
TRANSITION FROM 8" (203) TO 10" (254) DUCT
REQUIRED FOR REMOTE BLOWER
D U C T I N G C O N S I D E R A T I O N S
Models W302210I and W362210I come with
internal blowers, all other Wolf Pro low-profile
wall hoods are shipped without the blower
assembly. Internal, in-line or remote blower
assemblies are available. The remote blower can
be mounted on the roof or an exterior wall. Refer
to the illustration below for ducting options.
Pro low-profile wall hoods have an adjustable
discharge location that can run vertically or
horizontally. Horizontal discharge is applicable on
low-profile wall hoods (excluding Models
W302210I and W362210I) using a remote
blower.
Refer to the Pro ventilation charts at the end of
this section for recommendations and blower
options.
