Pro Ventilation Hood Operation
10
Hood Controls
Controls for pro ventilation hoods and hood liners are
recessed under the front edge of the hood. Refer to the
illustration below.
LIGHT CONTROL
The left control knob operates the halogen lights. There
are two settings, HIGH and LOW. The LOW setting can be
used as a night-light. From the OFF position, turn the
control knob to the desired light setting, left for LOW and
right for HIGH light setting.
HEAT LAMP CONTROL
If your hood is equipped with heat lamps, a center control
knob will control the lamps. Each heat lamp may function
independently or both lamps may be activated simultane-
ously from the single knob. From the OFF position, simply
turn the control knob to the right to activate the right heat
lamp or to the left to activate the left lamp. When the
knob is in the vertical position, both heat lamps will be
activated.
BLOWER CONTROL
The right control knob which operates the blower is
variable, allowing infinite control of the blower speed.
Rotate the knob fully counterclockwise to turn the
blower off.
Heat Sentry Feature
Heat sentry feature turns the ventilation hood on when
heat is sensed and adjusts the blower speed automati-
cally. The heat sentry feature is activated when the
exhaust temperature from the hood reaches 200°F (95°C)
and deactivated when the exhaust temperature decreases
to 186°F (85°C).
At 200°F (95°C) the blower motor will automatically adjust
to HIGH speed. When the sensor cools down to 186°F
(85°C) it adjusts the blower back to the setting on the
blower control. For example, if blower motor is in LOW
speed and threshold temperature is reached, the blower
will increase to HIGH speed.
HALOGEN
LIGHTS
HEAT
LAMPS
BLOWER
Hood controls.