6
GLOBAL MUTE
All paired devices will be
muted / unmuted. The
corresponding channel
LED will flash white/green
while the communication
is in progress.
When communication
was successful, the
channel LED’s will turn to
a solid white / green to
indicate the channel has
been muted / unmuted.
A press of
will start the global mute sequence, and a
quick double press will start the global unmute sequence.
Colour is used to differentiate between mute and unmute.
White representing a mute operation, and green an unmute.
If some paired devices are unreachable, they may not
successfully mute. If this happens, the corresponding
channel LED will alternate between white / green and red.
To return the Qr HUBB to factory
settings, and clear all user data, power
the Qr HUBB off, and then power
it back on while holding the
key.
When all the channel LED’s turn Blue,
release only the
key while keeping
pressed. After the Blue LED’s have
flashed and turned Off, the Qr HUBB
can be turned back on by holding
.
FACTORY DEFAULT
CHANNEL SELECT
From idle, Press OK to enter channel
browsing mode. The last channel to
receive an alert will be selected by
default, and its corresponding channel
LED will pulse in the selected alert
colour. If the channel is unpaired, the
channel LED will fast blink red.
The
▲
and
▼
keys are used to
navigate between the different
channels.
The Device Option LED will illuminate if applicable for this
device. The LED will illuminate red to indicate that the Device
Option Toggle is off, or green to indicate the toggle is on.
See ‘Device Option Toggle’ for more info.
