Wolf ICBWGKT100S-AU, Руководство пользователя

Страница: 14 / 16

14
Wolf, Wolf & Design, Wolf Gourmet, W & Design and the colour red as applied to knobs are registered trademarks and service marks
of Wolf Appliance, Inc. Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens, The Fine Art
of Kitchen Design and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. (collectively, the ‘Company Marks’).
All other trademarks or registered trademarks are the property of their respective owners in the United States and other countries.
Troubleshooting
‘E 01’ is displayed.
• Press the (keep warm) button. If ‘E 01’ is still displayed, refer to the Customer Care
information on wolfgourmet.com.
‘E 02’ or ‘E 03’ is displayed.
• Turn the knob clockwise or anti-clockwise. If ‘E 02’ or ‘E03’ is still displayed, refer to
the Customer Care information on wolfgourmet.com.
‘E 07’ is displayed.
• Press the (start/stop) button. If ‘E 07’ is still displayed, refer to the Customer Care
information on wolfgourmet.com.
‘E 08’ is displayed.
• Press the (keep warm) and (start/stop) buttons simultaneously and turn the
knob clockwise or anti-clockwise. If ‘E 08’ is still displayed, refer to the Customer
Care information on wolfgourmet.com.
‘FIL H2O’ is displayed.
• Lift the vessel from the base. Fill the vessel with at least 0.5L water and place the
vessel back on the base. Press the (start/stop) button to begin heating.
NOTES:
• If water overflows from the vessel spout during heating, too much water was
added to the vessel. The MAX level is 1.5 litres.
• If the lid falls off of the vessel when pouring, the seal is not in place. Ensure the
lower seal is properly installed in the lid before each use.