Wolf ICBCI243C/B, Руководство по конструкции

Страница: 5 / 9

5
|
English
INDUCTION COOKTOPS
Planning Information
A minimum height clearance of 159 mm is required from the
top of the countertop to any combustible surface directly
below the cooktop.
Contemporary induction cooktops can be mounted flush
with the top of the countertop, or as a frameless standard
installation sitting on top of the countertop surface. If the
cooktop is to be mounted flush with the countertop, a
recessed area surrounding the cooktop cut-out must be
provided. Wolf downdraft systems cannot be used with
contemporary induction cooktops.
IMPORTANT NOTE:
Flush mount installations are intended
for granite, solid surface or stone countertop surfaces only.
ELECTRICAL
Installation must comply with all applicable electrical codes
and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on
the following pages. A separate circuit, servicing only this
appliance is required.
Performance may be compromised if the electrical supply is
less than 220 volts.
The cooktop is supplied with a single phase and 3-phase
convertible power inlet box.
ELECTRICAL REQUIREMENTS
INDUCTION COOKTOPS SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC
50/60 Hz
380-415 V AC
50 Hz
TOTAL AMPS SINGLE PHASE 3-PHASE
60 cm Induction 30 16
76 cm Induction 32 16
91 cm Induction 48 16
INDUCTION
COOKTOPS |
Induction Cooktops
ELEMENT RATING
60 cm COOKTOP W
279 mm 2600 | 3150 boost
203 mm 2100 | 3000 boost
203 mm 2100
76 cm COOKTOP W
279 mm 2600 | 3150 boost
203 mm 2100 | 3000 boost
203 mm 2100
152 mm 1400
91 cm COOKTOP W
279 mm 2600 | 3700 boost
(2) 203 mm 2100 | 3000 boost
(2) 203 mm 2100