
5
C A B I N E T R Y
2
Your cabinet installer will make the necessary adjustments when completing your project. However, like most
elements of your home, your cabinetry will require some minor adjustments to maintain optimal performance.
Door and drawer adjustments are common — and simple — for any homeowner to perform. NOTE: Always
use a Phillips headscrew driver for adjustments. Using an electric screw gun may cause serious damage to
your cabinetry.
PROBLEM
PROBLEM
PROBLEM
SOLUTION
SOLUTION
SOLUTION
COMMON ADJUSTMENTS
5
Loosen the hinge screws
attaching the hinge to the door
frame. Slide the door up or down
until aligned, then tighten screws.
Doors do not line up vertically
Too much space between doors
Drawer does not close evenly
Adjust hinges on door frame
Adjust hinges on doors
Manually adjust drawer guide member
Loosen the hinge screws on the
arm of the hinges and slide the
door toward the middle of the
cabinet. Make sure the teeth on
the hinge match up, then tighten
the screws.
To correct drawer alignment, adjust
the drawer guide member, attached
from the front edge of the cabinet
to the back, by manually realigning
the member in the back socket
(member moves to the right and to
the left approximately 1/2"). Once
realigned, be sure to check that the
drawer guide operates smoothly.
Gap
exceeds
1/8"
Содержание DESIGNER
Страница 1: ...Care Maintenance Guide C A B I N E T R Y ...