Cooktop Chimney Hood Operation
8
Hood Controls
The Wolf cooktop chimney hood is operated using the
controls along the front edge of the hood. Refer to the
illustration below.
•
The blower operates at three speeds. The HIGH,
MEDIUM or LOW button can be pressed to activate the
blower. The corresponding LED indicator will illuminate
to indicate the blower speed. To turn the ventilation
hood off, depress the active button a second time.
•
The LIGHT button turns the halogen lights on and off.
The LIGHT button also allows you to brighten or dim
lighting. Lighting has three levels, high, medium and
low.
•
The LED next to the FILTER button on the controls will
illuminate when it is time to clean the grease filters.
This indicator light comes on after approximately 30
hours of operation. Refer to grease filters on page 10.
To reset the FILTER clean LED indicator, press the
FILTER button.
Hood controls.
Delay-off button
Filter clean
LED indicator
Light button
Three-speed
blower controls
DELAY-OFF MODE
The delay-off mode will allow the ventilation hood blower
to continue operating at the selected speed for approxi-
mately five minutes after the DELAY button has been
pressed. This mode allows you to leave the cooking area,
while the ventilation hood is still in operation; the blower
will then shut off automatically in five minutes.
In delay-off mode, both the DELAY LED and the corre-
sponding blower speed LED will be illuminated.
•
If the blower is on high or medium speed and the
DELAY button is pressed, the blower will stay on that
speed for five minutes. It will then switch to low speed
for an additional five minutes before turning off.
•
If the blower is on low speed and the DELAY button is
pressed, the blower will stay on low speed for five
minutes before turning off.
•
If the DELAY button is pressed when the blower is off,
no operation will take place.
•
If the DELAY button is pressed when the unit is already
in delay-off mode, the delay-off mode will be cancelled.
