wolfappliance.com
|
9
Wiring Connections
INTERNAL BLOWER WIRING
1
Remove the top cover of the electrical box by extracting
two screws. Refer to the illustration below.
2
Remove the two existing wires from the left side of the
terminal block, then transition them to the right and
secure. Refer to the illustration below.
3
Place all wiring connections inside the electrical box and
reinstall the cover. Make sure all wires are secure and not
pinched between the cover and electrical box.
4
Secure the junction box supplied with the hood to the
wall, then connect to the (Romex
®
) power supply from
the home. Once the connection has been made, insert
the plug into the receptacle on the hood.
MOVE WIRES
HERE
COVER
BLUE
BR
OW
N
BLUE
BR
OW
N
TO INTERNAL
BLOWER
BLUE
BR
OW
N
Wiring location.
Internal blower wiring.
INSTALLATION
IN-LINE / REMOTE BLOWER WIRING
1
Remove the top cover of the electrical box by extracting
two screws. Refer to the illustration below.
2
Remove one of the round knockouts using a flat blade
screwdriver.
3
Insert Romex
®
wire from the blower through the
knockout and secure using an approved cord stain relief.
4
Connect white to blue, black to brown and green to
ground. Refer to the illustration below.
5
Place all wiring connections inside the electrical box and
reinstall the cover. Make sure all wires are secure and not
pinched between the cover and electrical box.
6
Secure the junction box supplied with the hood to the
support frame, then connect to the (Romex
®
) power
supply from the home. Once the connection has been
made, insert the plug into the receptacle on the hood.
KNOCKOUT
COVER
WHITE
BLA
CK
GREEN
GROUND
BLUE
BR
OW
N
TO IN-LINE/REMOTE
BLOWER
BLUE
BR
OW
N
Wiring location.
In-line / remote blower wiring.
