8
|
Wolf Customer Care 800.222.7820
CONTROL KNOBS
For 15" and 36"
models, the control knobs are positioned to
correspond with the surface burners they regulate. For 24"
and 30"
models, a diagram on the control panel above each
knob indicates which burner it regulates. For the contempo-
rary model, a diagram on each knob bezel indicates which
burner it regulates.
For transitional models, the backlit controls are invisible
when the cooktop is off.
BURNER GRATES
For 24"
models, the grates must be positioned correctly to
ensure proper burner performance. The grates have an indi-
cator on the bottom of the front edge. Position the grates
with the indicator toward the front of the cooktop. Refer to
the illustration below.
COOKTOP OPERATION
Cooktop Operation
SURFACE BURNERS
To light a burner, push and turn the corresponding control
knob counterclockwise to HI. The igniter will begin to click
until burner is lit. Once lit, continue to turn the knob counter-
clockwise to the desired setting.
To select a simmer setting, turn the control knob to the
detent at the lowest setting. Push and continue to turn
counterclockwise. The flame will transition to the second tier
on the burner cap. Continue to turn the knob to the desired
simmer setting.
During a power outage, surface burners can be lit manually.
Turn the control knob to HI, then light using a multi-purpose
lighter.
CAUTION
Never leave pans on a high setting unattended. Be
careful when cooking food in fat or grease; it can
become hot enough to ignite.
CAUTION
Do not use pans that extend beyond the cooktop
frame. Heat may be trapped beneath the pan causing
damage.
FRONT
Grate placement (24" model)
