4. Install rear side-to-side support rail
in the rear slots of warming draw-
er interior pan by following Step
#3. Make sure that tab size and
slot size are proportional.
5. Remove protective packaging
from front-to-back support rails.
6. Install front-to-back support rails
by sliding small tab into rear side-
to-side support rail and large tab
into front side-to-side support rail.
Make sure that the tab size and
slot size are proportional.
NOTE:
Placement of front-to-back
support rails is dependent upon pan
needs. Refer to Illustration 2 to deter-
mine rail location and pan installation
combinations.
7. Place filler panel on right side of
support rail assembly. Insert large
tab into large slot on front side-to-
side support rail and small tab into
small slot on rear side-to-side
support rail.
8. Arrange pans to suit food storage
needs.
Illustration 2
Use and Care for Warming
Drawer Pan Set
Before using your warming drawer
pan set, clean pans thoroughly with
hot water and a mild detergent.
Rinse and dry with a soft cloth.
Use the pan lids to keep moist foods
moist. Lids will also keep excessive
moisture from building up on interior
and exterior surfaces of warming
drawer.
Do not use plastic wrap to cover hot
pans in the warming drawer. Plastic
wrap could melt and damage the
interior of your Wolf Warming
Drawer.
Wolf Appliance Company, LLC
¥
P.O. Box 44848
¥
Madison, WI 53744
¥
800-332-9513
¥
www.wolfappliance.com
804626A 6/03
W
O L F
W
A R M I N G
D
R A W E R
P
A N
S
E T
I
N S T A L L A T I O N
I
N S T R U C T I O N S
A N D
U
S E
A N D
C
A R E
COMBINATIONS WITH FULL SIZE PAN
COMBINATIONS WITHOUT FULL SIZE PAN
Use caution before touching Warm-
ing Drawer pans and/or lids; be sure
that the surfaces have cooled to
a safe temperature to avoid steam
burns.
Use dry pot holder when handling
as pan lids become hot when Warm-
ing Drawer is on and holds heat
after turned off.
IMPORTANT NOTE:
Never leave food in warming
drawer for more than two hours.
CAUTION
CAUTION
