MODEL 801642
Page 3
OUTSIDE - ROOF VIEW
OUTSIDE - ROOF VIEW
OUTSIDE - ROOF VIEW
OUTSIDE - WALL VIEW
10 Cover
10 Cover
Screws
Screws
10 Cover
Screws
Drill 6
Mounting
Holes
Bird Screen
Bird Screen
Flashing
Sheet
Flashing
Sheet
Drill 6
Mounting
Holes
Damper
11" dia.
hole
22"
Pilot Hole
(centered between studs)
22"
29½"
29½"
14
11
/
16
"
11
13
/
16
"
11
13
/
16
"
17"
W
all Stud
W
all Stud
11" dia.
hole
17"
1¼" dia. hole
1¼" dia. hole
3"
REMOVE
SIDING
REMOVE
SIDING
Pilot Hole
(centered between studs)
PREPARE THE WALL
WIRE THE VENTILATOR
From inside the wall:
q
1
Drill a PILOT HOLE through the wall, centered between
WALL STUDS.
From outside - on the wall:
q
2
Measure and mark the 22" x 29½" rectangle. Cut and
remove only the siding inside this rectangle.
q
3
Measure and mark the 11" DIAMETER HOLE and the
1¼" DIAMETER HOLE. Cut these holes all the way through
the wall.
BLACK TO BLACK
WHITE
TO
BLUE
120
VAC
LINE
IN
GROUND
TO
GROUNDING
SCREW
INSTALL THE VENTILATOR
q
4
Remove 10
COVER SCREWS
and lift off
ventilator cover.
q
5
Feed the electric
power cable
through the 1¼"
DIAMETER HOLE
and connect cable
to ventilator with a
proper connector
for the type of
cable being used.
q
6
Connect BLACK
TO BLACK,
WHITE TO BLUE,
and GROUND TO
GROUNDING
SCREW.
q
7
Place ventilator on wall so that ventilator's discharge collar
fits into 11" diameter hole.
q
8
Use the 6 screws (provided) to attach the ventilator to the
wall. DRILL 6 MOUNTING HOLES inside the ventilator, as
necessary.
q
9
Seal the screw heads and edges of the flashing sheet with
a good grade of roofing cement.
q
10
Check for free movement of the spring-loaded DAMPER
and re-install ventilator cover. Turn on power and check
operation.
WALL MOUNT
INSTALLATION
For use with Wolf CTWH30/CTWH36 wall mount, IH4227 island chimney hoods, DD30R/DD36R downdraft ventilators, 18” tall
island/wall hoods & 12” tall liners.
Содержание 801642
Страница 5: ......