Battery installation
•
Ensure that the On/Off Knob is switched off.
•
Open the Battery Cover. Insert the tailor-made Lithium Battery into the Chamber and plug the
battery cord into the Power Connector in the correct direction as shown in the figure to ensure
that the power supply is connected. Close the battery cover.
•
Battery 1st warning sound is heard when the battery power of the headset falls to
20%. Subsequent "DO" sound will be prompted in every 5
th
minute till the user re-charges
the battery or all power is completely discharged.
•
The manufacturer provides the tailor-made Lithium Battery. Other types of Lithium Batteries
are not recommended.
DAB+ Operation
•
Turn on the hearing protection by turning the Power On/Off Knob (which combines Volume
Control) in clockwise direction and adjust the sound to your desired level.
•
“Welcome to Digital Radio” is shown on the LCD screen. The headset is now set in DAB+
mode and will start the auto-scan to search DAB+ radio stations.
•
During the scanning, “searching...” appears on the display. When a station is found, the
DAB+ frequency, name and other messages are shown on the display. Press Tune - or Tune
+ to listen to the previous or next station.
•
When you are listening to the radio station, press Menu to view the service provider’s
information.
•
To save your favorite stations, long-press Menu, then press Tune - or Tune +, the LCD
screen will d
isplay “Save Preset”, then press the Enter key, the LCD screen will show “Preset
Empty 1" where 1 is flashing. Press Tune - or Tune + to select the sequence number that
you want to save and then press ”Enter” to confirm the preset no. A total of 10 preset
stations for DAB+ radio can be saved.
•
To listen to the preset stations, long-press Menu. Then press Tune + or Tune -, to select,
“Call Preset”, press Enter to confirm. Press Tune - or Tune + to choose your favorite stations
and press “Enter” to confirm.
•
Manual Tune - Long-
press Menu “Auto Scan” will appear on the screen. Select “Manual
Tune” by pressing Tune - or Tune +. The frequency will be visible on the display, press Tune
- or Tune + to adjust to your desired frequency, auto scan will then be started to search all
stations within your selected frequency. After it has scanned, a list of stations will appear on
the display, and the hearing protection starts to play the 1st station automatically. To listen to
the next station, press “Enter”, then press Tune - or Tune + to select the stations.
•
Auto Scan - Long-press Menu, select Auto Scan and pre
ss Enter to confirm the setting.
Auto-
Tune full scan starts to receive the DAB+ signal, If no stations are found, “No Service”
will appear on the display.
•
Time update function: Time setting can be adjusted automatically synchronize the radio time
and date in the DAB Mode.
Bluetooth Operation
•
Turn on the Bluetooth function on your mobile phone or any other external Bluetooth
devices.
•
Search for
‘WOLF Headset PRO’ on your Bluetooth device, and pair them. When paired,
“Bluetooth Connected” is shown on the LCD screen.
•
Press Menu, to play/pause the music or answer a call. Tap Tune + or Tune
– to
forward/rewind the songs. To reject the call, long-press Tune - for 2 seconds.
•
Re-dialing, long-press Tune + for 2 seconds, it will re-dial last call. When you receive a call
through the Bluetooth function, it overrides the sound from FM/DAB+/AUX. Even pressing
Mode activates nothing until the mobile call ends.
•
After paired, the user still receives and answers a call while in Radio and Aux-in mode.