Wolf Garten HS 50 E, Оригинальная инструкция по эксплуатации

Страница: 14 / 116

14 en
Service
• If the electric tool needs to be repaired, have the
repair carried out by specialist personnel and
instruct them to use only original spare parts.
This ensures the operational safety of the electric
tool.
Tool-specific safety instructions for
hedge shears
• Keep all body parts away from the cutting blade.
Never attempt to remove any cuttings or hold
material to be cut while the blade is still running.
Do not remove cuttings that have become stuck
unless the tool is switched off.
A moment of
carelessness while using the shears may cause
serious injury.
• Only carry the hedge shear by its handle and if
the blade is standing still. Always slip on the
protective cover when transporting or storing
the shears.
Handling the tool carefully reduces the
risk of injury caused by the blade.
• Keep the cable away from the cutting range.
While working, you may inadvertently cut the cable
as it may be hidden by the shrubbery.
• The machine is designed exclusively for cutting
hedges.
Use for purposes other than those inten-
ded qualify as improper use. The manufactu-
rer/supplier is not responsible for any damages that
result from improper use. The operator is solely re-
sponsible for assuming all risks.
• Never attempt to use a machine that is not fully as-
sembled or one that has been altered in a manner
that is not permitted.
• Work at a height where you do not run the risk of the
blade coming into contact with the ground.
• If the blade becomes jammed by thick branches, for
example, the hedge shears must be shut off:
– Pull out the power plug.
– Do not touch running blades.
– Remove the cause of the blockage.
Cables
1
Attention! Electric shock through cable da-
mage
When the cable is cut through or damaged,
the safety fuse doesn’t always trip.
• Do not touch cable, before pulling out the
power plug from the socket.
• Damaged cable has to be completely re-
placed. Patching the cable with insulating
tape is forbidden.
• Use only extension cables with a minimum cross-
section of 3 x 1.5 mm
2
and a length of max. 25 m:
– When using rubber-sheathed cables, they must
be of type HO 7 RN-F or heavier.
– When using PVC-sheathed cables, they must be
of type HO5 VV-F or heavier (cables of this type
are not suitable for continuous outdoor use - e.g.
underground installation for the connection of an
outdoor socket or pond pump, or outdoor sto-
rage).
• Plugs and couplings must be protected from spla-
shes.
• Use a residual current protection device (RCD) with
a residual current not exceeding 30 mA.
• Fit the connection cable to the mains lead cleat. Do
not allow to rub against edges or against sharp or
pointed objects. Do not squeeze cables through
tight door or window openings. Switch devices must
not be removed or circumvented (e.g. connecting
the switch lever to the handle bars)
Disposal
Power tools do not belong in
household garbage. Bring the the de-
vice, accessories and packaging to
an environmentally-friendly recycling
location.