Users
cable
typically require
alignment
indoors
if
outdoor
lightning
traces
measures
should.
Equipment Installation
ONU product is a fixed configuration cassette equipment, site equipment installation is
relatively simple. Simply install the device on a specified place, connecting the upstream fiber
subscriber line connections, connect the power cable. Actual operation is as follows:
1. Installed on the desktop
Place the machine on a clean bench, this installation is relatively simple, you can observe the
following operation:
Ensure the smooth workbench.
Around the device enough
space for heat dissipation
.
Do not place objects on the device.
2. Mounted on the wall
Observation ONU equipment chassis two cruciform recess, in accordance with the
position of the groove, installed two screws in the wall.
The original selected two mounting screws gently snap into recesses aligned.
Slowly let go, so that the device under the support of the screw hanging on the wall.
2.2 Panel Lights
LED
Mark
Status
Description
Power
POWER
On
The device is powered up.
Off
The device is powered down.
Optical
signal
loss
LOS
Blink
Device does not receive optical signals.
Off
Device has received
optical signal.
Registration
REG
On
The device is registered
to the
PON system.
Off
Device is not
registered to the
PON system.
Blink
Device
registration
is incorrect.
Interface
LINK/A
CT
On
Port is connected
properly (LINK).
Off
Port
connection exception
or not connected.
Blink
Port is
sending or/and receiving data (ACT).
WiFi
WiFi
On
WiFi is working
Off
WiFi is not working
CATV
CATV
On
CATV is working
Off/
Blink
CATV signal is abnormal
Table 3 Panel Lights
