WOK BCW, Руководство пользователя, Страница: 8 / 28

PRE-USE INSPECTION AND SETUP
SAFETY CHECKLIST
WARNING If you fail to heed these warnings, severe injury may occur to you or
others. Before each use of your wheelchair you should:
1. Make sure that your chair rolls easily and freely and that all parts work smoothly.
2. Check for excess noise, vibration or a change in ease of use. They may be signs of a
problem such as low tire pressure, loose fasteners or damage to the chair.
3. If you detect a problem, make sure to repair or adjust your chair before using it. Contact
your authorized Wheelchairs of Kansas dealer to help you find and correct the problem.
WHEELCHAIR ASSEMBLY
Determining whether assembly is required will depending on the method of shipping. The
wheelchair is shipped two different ways, one way is completed assembled and the other way
the casters and wheels must be bolted on.
Tools required: 2 - ½”Open End Wrench
2 - 15/16” Open End Wrench
To bolt on the back wheels, slide the bolt through the wheels and then add the spacer. Attach
wheel assembly through the frame and secure the nut with a 15/16” wrench.
Slide the caster up into the frame of the chair, slide bolt in through the pre-drilled hole. Attach
nut with a ½”wrench.
4